Seamless Pipes
3LPP Coated Pipes
The best Services branded Austriatubi
Finishing
3LPE Coated Pipe
Varnishing
Wide Variety Quality Stock for Fast Delivery
Boiler & Pressure Tube

DUPLEX STAINLESS STEEL PIPE

GRADE UNS S31803/1.4462

ASTM A/ASME SA 789 ASTM A/ASME SA 790

EN 10216-5 NACE MR 0175

1/2 “ - 12 “ NPS SCH 40S SCH 160S

STOCK SEAMLESS AUSTENITIC STAINLESS STEEL

10 MM—219,1 MM 2 MM—8.18 MM

GRADE UNS N08904/TP904L/1.4539

ASTM A 312 ASME SA312

DIN 10204/3.1 EN 10216-5

SUPER DUPLEX STAINLESS STEEL PIPE

1/2” - 8” NPS   10S—80S

GRADE UNS S32760 / 1.4501

ASTM A /ASME A 790

 

 

EN 10216 –5 TC2 NACE MR 0175

AUSTENITIC STAINLESS STEEL

1/4” - 8”   SCH 40S SCH 80S

GRADE TP310S/1.4845

 

 

Grade Selector

SPECIAL PRODUCTS

Epoxy mastic, longline Foil Heating cable,

shrinkable sleeves, repair kits, gas cylinders,

electric motors and fans.

 

 Wide flange BEAMS, universal beams,

H section, HE, IPE, IPN

 

HOT ROLLED NON ALLOYED SHEETS

hardened and tempered sheets for structural uses

 

SAFETY TECHNOLOGY, COMPONENTS

 

 

 

astm a106 grade b pipe2

 

 Easyto search

Search:

 Standard   Grade   C   Mn   Si   P. max   S. max   Cu   Ni   Cr   Mo   V   Al   N   NbTiBAsW 
ASTM A355P 910.08-0.120.3-0.60.2-0.50.020.018-9.50.85-1.05
API Spec. 5 CTH-400.030.03
API Spec. 5 CTJ-550.030.03
API Spec. 5 CTK-550.030.03
API Spec. 5 CTN-800.030.03
API Spec. 5 LAmax. 0.22max. 0.900.030.03
API Spec. 5 LBmax. 0.28max. 1.200.030.03
API Spec. 5 LX 42 - PSL 1max. 0.28max. 1.300.030.015
API Spec. 5 LX 42 - PSL 2max. 0.24max. 1.300.0250.03
API Spec. 5 LX 46 - PSL 1max. 0.28max. 1.400.030.015
API Spec. 5 LX 46 - PSL 2max. 0.24max. 1.400.0250.03
API Spec. 5 LX 52 - PSL 1max. 0.28max. 1.400.030.015
API Spec. 5 LX 52 - PSL 2max. 0.24max. 1.400.0250.03
API Spec. 5 LX 56 - PSL 1max. 0.28max. 1.400.030.015
API Spec. 5 LX 56 - PSL 2max. 0.24max. 1.400.0250.03
API Spec. 5 LX 60 - PSL 1max. 0.28max. 1.400.030.015
API Spec. 5 LX 60 - PSL 2max. 0.241.400.0250.045
ASTM A53Gr. A_max. 0.25max. 0.950.050.045max. 0.40max. 0.40max. 0.40max. 0.15max. 0.08
ASTM A53Gr. B_max. 0.30max. 1.200.050.035max. 0.40max. 0.40max. 0.40max. 0.15max. 0.08
ASTM A106Gr. Amax. 0.250.27-0.930.0350.035max. 0.40max. 0.40max. 0.40max. 0.15max. 0.08
ASTM A106Gr. Bmax. 0.300.29-1.06min. 0.100.0350.035max. 0.40max. 0.40max. 0.40max. 0.15max. 0.08
ASTM A106Gr. Cmax. 0.350.29-1.06min. 0.100.0350.025max. 0.40max. 0.40max. 0.40max. 0.15max. 0.08
ASTM A333Gr. 1max. 0.300.40-1.06min. 0.100.0250.025
ASTM A333Gr. 6max. 0.300.29-1.06min. 0.100.0250.025
ASTM A335P10.10-0.200.30-0.800.10-0.500.0250.0250.44-0.65
ASTM A335P110.05-0.150.30-0.600.50-1.000.0250.0251.00-1.500.44-0.65
ASTM A335P120.05-0.150.30-0.61max. 0.500.0250.0250.80-1.250.44-0.65
ASTM A335P220.05-0.150.30-0.60max. 0.500.0250.0251.90-2.600.87-1.13
ASTM A335P5max. 0.150.30-0.60max. 0.500.0250.0254.00-6.000.45-0.65
ASTM A335P20.10-0.200.30-0.610.10-0.300.0250.0350.50-0.810.44-0.65
DIN20 MnV60.16-0.221.30-1.700.10-0.500.0350.010.10-0.20
DINX10CrMoVNb910.08-0.120.30-0.600.20-0.500.020.04max. 0.408.00-9.500.85-1.050.18-0.25max. 0.0400.030-0.070Nb0.06-0.10
DINSt. 52.0V0.17-0.220.90-1.200.17-0.370.040.020-max. 0.30max. 0.30max. 0.30min. 0.015B0.001-0.004
DINSt 52.0 MEC0.16-0.201.25-1.50-0.0350.035max. 0.100.020-0.050
DIN 1629St 37.0max. 0.17-0.040.0412
DIN 1629St 44.0max. 0.21-0.040.0412
DIN 1629St 52.0max. 0.22max. 1.60max. 0.550.040.035min. 0.020
DIN 1630St 37.4max. 0.17min. 0.35max. 0.350.040.04min. 0.020
DIN 1630St 44.4max. 0.20min. 0.40max. 0.350.040.04min. 0.020
DIN 1630St 52.4max. 0.22max. 1.60max. 0.550.040.035min. 0.020
DIN 17 121RSt 37-2max. 0.170.050.05max. 0.009
DIN 17 121St 44-2max. 0.210.050.05max. 0.009
DIN 17 121St 37-3max. 0.170.040.04min. 0.020
DIN 17 121St 44-3max. 0.200.040.04min. 0.020
DIN 17 121St 52-3max. 0.22max. 1.60max. 0.550.040.04min. 0.020
DIN 17 172StE 210.7max. 0.17min. 0.35max. 0.450.040.035
DIN 17 172StE 240.7max. 0.17min. 0.40max. 0.450.040.035min. 0.020
DIN 17 172StE 290.7max. 0.220.50-1.10max. 0.450.040.035min. 0.020
DIN 17 172StE 320.7max. 0.220.70-1.30max. 0.450.040.035min. 0.020
DIN 17 172StE 360.7max. 0.220.90-1.50max. 0.550.040.035min. 0.020
DIN 17 173TTSt 35Nmax. 0.17min. 0.40max. 0.350.030.025min. 0.020
DIN 17 173TTSt 35Vmax. 0.17min. 0.40max. 0.350.030.025min. 0.020
DIN 17 175St 35.8max. 0.170.40-0.800.10-0.350.040.04
DIN 17 175St 45.8max. 0.210.40-1.200.10-0.350.040.04
DIN 17 17515Mo30.12-0.200.40-0.80max. 0.500.0350.0350.25-0.35
DIN 17 17510CrMo9100.08-0.150.40-0.700.10-0.350.0350.0352.00-2.500.90-1.20
DIN 17 17513CrMo440.10-0.180.40-0.700.10-0.350.0350.0350.70-1.100.45-0.65
DIN 17 17514MoV630.10-0.180.40-0.70max. 0.500.0350.0350.30-0.600.50-0.700.22-0.32
DIN 17 17612CrMo19.50.08-0.150.30-0.60max. 0.400.0250.024.00-6.000.45-0.65
DIN_1720425CrMo40.22-0.290.60-0.90max.0.400.0350.030.90-1.200.15-0.30
DIN_1720434CrMo40.30-0.370.60-0.90max.0.400.0350.030.90-1.200.15-0.30
DIN_1720441Cr40.38-0.450.60-0.90max.0.400.0350.030.90-1.20
DIN_17204C220.17-0.240.30-0.90max.0.400.0450.045
DIN_17204C350.32-0.390.50-0.80max.0.400.0450.045
DIN_17204C450.42-0.500.50-0.80max.0.400.0450.045
DIN_17204C550.52-0.60 0.60-0.90max.0.4010.0450.045
DIN_17204C600.57-0.650.60-0.90max.0.400.0450.045
DIN_17204Ck2210.17-0.240.30-0.60max.0.400.0350.03
DIN_17204Ck350.32-0.390.50-0.80max.0.400.0350.03
DIN_17204Ck450.42-0.500.50-0.80max.0.400.0350.03
DIN_17204Ck550.52-0.600.60-0.90max.0.400.0350.03
DIN_17204Ck600.57-0.650.60-0.90max.0.400.0350.03
DIN_17210C100.07-0.130.30-0.60max.0.400.0450.045
DIN_17210C150.12-0.180.30-0.60max.0.4010.0450.045
DIN_17210Ck100.07-0.130.30-0.60max.0.400.0350.035
DIN_17210Ck150.12-0.180.30-0.60max.0.400.0350.035
DIN_2391St35max.0.17min.0.40max.0.350.050.05
DIN_2391St45max.0.25min.0.40max.0.350.050.05
DIN_2391St52max.0.22max.1.60max.0.550.050.05
DIN_17100ZSt60-2max.0.400.20-0.500.03-0.300.0350.05max.0.012
DIN_17100St60-2max.0.400.20-0.500.03-0.300.0350.05max.0.012
EN_10155S335J2G1Wmax.0.160.5-1.50max.0.500.0250.0350.25-0.55max.0.650.40-0.80max.0.30
EN_10208-2L245NBmax.0.16max.1.10max.0.400.0250.02max.0.25max.0.30max.0.30max.0.100.015-0.060max.0.012
EN_10208-2L290NBmax.0.17max.1.20max.0.400.0250.02max.0.25max.0.30max.0.30max.0.10max.0.050.015-0.060max.0.012Ti a Nb max.0.04
EN_10208-2L360NBmax.0.20max.1.60max.0.450.0250.02max.0.25max.0.30max.0.30max.0.10max.0.10max.0.012Ti a Nb max.0.05
EN_10210S235JRHmax.0.17max.1.400.0450.045max.0.009
EN_10210S275JOHmax.0.20max.1.50400.04min. 0.020max.0.009
EN_10210S275J2Hmax.0.20max.1.50350.035min. 0.020
EN_10210S355JOHmax.0.22max.1.60max.0.55400.04min. 0.020max.0.009
EN_10210S355J12Hmax.0.22max.1.60max.0.550.0350.035min. 0.020
EN_10216-1P195TR1max.0.13max.0.70max.0.350.0250.02max.0.30max.0.30max.0.30max.0.08max.0.02max.Nb=0.010 Ti=0.04 Cr+Cu+Mo+Nill max.0.7
EN_10216-1P195TR2max.0.13max.0.70max.0.350.0250.02max.0.30max.0.30max.0.30max.0.08max.0.02min. 0.020max.Nb=0.010 Ti=0.04 Cr+Cu+Mo+Nill max.0.7
EN_10216-1P235TR1max.0.16max.1.20max.0.350.0250.02max.0.30max.0.30max.0.30max.0.08max.0.02max.Nb=0.010 Ti=0.04 Cr+Cu+Mo+Nill max.0.7
EN_10216-1P235TR2max.0.16max.1.20max.0.350.0250.02max.0.30/max.0.30max.0.30max.0.08max.0.02min. 0.020max.Nb=0.010 Ti=0.04 Cr+Cu+Mo+Nill max.0.7
EN_10216-1P265TR1max.020max.1.40max.0.400.0250.02max.0.30max.0.30max.0.30max.0.08max.0.02max.Nb=0.010 Ti=0.04 Cr+Cu+Mo+Nill max.0.7
EN_10216-1P265TR2max.0.20max.1.40max.0.400.0250.02max.0.30max.0.30max.0.30max.0.08max.0.02min. 0.020max.Nb=0.010 Ti=0.04 Cr+Cu+Mo+Nill max.0.7
EN_10216-2P195GHmax.0.13max.0.70max.0.350.0250.02max.0.30max.0.30max.0.30max.0.08max.0.02min. 0.020Cr+Cu+Mo+Nill max.0.7
EN 10216-2P235GHmax. 0.16max. 1.20max. 0.350.0250.02max. 0.30max. 0.30max. 0.30max. 0.08max. 0.02min. 0.020max. 0.20Cr+Cu+Mo+Ni max. 0.7
EN 10216-2P265GHmax. 0.20max. 1.40max. 0.400.0250.02max. 0.30max. 0.30max. 0.30max. 0.08max. 0.02min. 0.020Cr+Cu+Mo+Ni max. 0.7
EN 10216-216Mo3max. 0.20max. 0.90max. 0.350.0250.02max. 0.30max. 0.30max. 0.30max. 0.35max. 0.040
Page 1 of 2
<<First <Prev 1 2 Next> Last>>
Query took 3.99 miliseconds
   

Physical Properties
Search:

 Standard   Grade   Heat Treatment   Re min _Mpa_ T up to 16 mm   Re min _Mpa_ t 16-40 mm   Re min _Mpa_ t 40-65 mm   Rm _Mpa_   A5 min _%_   KV _j_   HB _max_ 
API Spec. 5 CTN-80Z552-758552-758min. 689viz. API
API Spec. 5 CTK-55U,N379-552379-552min. 655viz. API
API Spec. 5 CTJ-55U,N379-552379-552min. 517viz. API
API Spec. 5 CTH-40U276-552276-552min. 414viz. API
API Spec. 5 LX 42-PSL 1U,N290290290min. 414viz. API
API Spec. 5 LB-PSL 2U,N241-448241-448414-758viz. APIKV=27 (0°C)
API Spec. 5 LA-PSL 1U,N207207207min. 331viz. API
API Spec. 5 LB-PSL 1U,N241241241min. 414viz. API
API Spec. 5 LX 42-PSL 2U,N290-496290-496414-758viz. APIKV=27 (0°C)
API Spec. 5 LX 46-PSL 1U,N317317317min. 434viz. API
API Spec. 5 LX 60-PSL 2U,N414-565414-565517-758viz. APIKV=27 (0°C)
API Spec. 5 LX 60-PSL 1U,N414414414min. 517viz. API
API Spec. 5 LX 56-PSL 2U,N386-544386-544490-758viz. APIKV=27 (0°C)
API Spec. 5 LX 56-PSL 1U,N386386386min. 490viz. API
API Spec. 5 LX 52-PSL 2U,N359-531359-531455-758viz. APIKV=27 (0°C)
API Spec. 5 LX 52-PSL 1U,N359359359min. 455viz. API
API Spec. 5 LX 46-PSL 2U,N317-524317-524434-758viz. APIKV=27 (0°C)
ASTM A106Gr.CN275275275min. 48530
ASTM A106Gr.BN240240240min. 41530
ASTM A106Gr.AN205205205min. 33035
Page 1 of 7
<<First <Prev 1 2 3 4 5 Next> Last>>
Powered by Tools JX

ERW, SAW, SAWL, HFI and HFW welded carbon pipes

from 1/2" to 60" - from sch. 20 to Sch. 160/XXS

EN, API 5L, ASTM, ASME different grades and classes

 

 

Welded stainless steel and special alloy pipes for
application with particular temperature requirements

from 1/2" to 60" - from sch. 20 to Sch. 160/XXS                               GammaTubi piuma

ASTM/ASME different grades and classes

DUPLEX and SUPERDUPLEX, NICKEL ALLOYS

ASTM/ASME different grades and classes

ASTM/ASME different grades and classes

DUPLEX and SUPERDUPLEX, NICKEL ALLOYS

 

For your PIPES you can choose the STEEL you want:

 

Welded stainless steel pipes

ASTM/ASME A/SA 312 TP 304/304L, TP 316/316l, TP 321

ASTM/ASME A/SA 269 TP 304/304L, TP 316/316L

Welded ERW and SAW carbon steel pipes

API5L GR. B, X52 + NACE

ASTM/ASME A/SA 671 different grades and classes

ASTM/ASME A/SA 672 different grades and classes

Welded SAW alloy steel pipes

ASTM/ASME A/SA 691 different grades and classes

Special alloy welded pipes for particular temperatures and corrosive conditions

DUPLEX and SUPERDUPLEX

ASTM/ASME A/SA 312, A358 different grades and classes

 

 

Subcategories

Page 2 of 2

News Flash

SMS group Wins Order for US$150 Million Structural Tube Mill

 

Pipe and tube maker Zekelman Industries has contracted SMS group as the primary equipment supplier for its new US$150 million electric-weld tube mill. 

In a statement, SMS group said that with the capability to produce 28-inch tube, the continuous mill will be the largest in the world. It is being designed to produce 400,000 tons annually of piling and hollow structural sections. 

The mill will produce round sections in diameters ranging from 10 ¾ inches to 28 inches, with wall thickness of up to 1 inch. It also will produce 8- to 22-inch square hollows and rectangular hollows of up to 34 by 10 inches. 

Zekelman announced the project last week, saying the mill is designed to meet demand for domestically produced, larger-sized hollow structural sections. As it is, builders and fabricators don’t have access to domestically made, welded hollow squares larger than 16 inches, according to Zekelman Industries. 

Zekelman said one of the mill’s key specifications will be its quick changeover time of less than 60 minutes. It also will have special forming and sizing technology for precise dimensional tolerance.

SMS group, too, said, the line will meet the highest requirements for quality and production output.

“The computer-controlled SMS group CSS Quicksetting system ensures that the rolls can be adjusted automatically to their working positions after the size change. Further to an operational speed reaching 35 m/minute, the line offers superior diameter/wall thickness ratio capability which, along with a quick product changeover time, results in great product flexibility.”

SMS group said the new order furthers an existing relationship with Zekelman Industries.   

“The company has placed several orders with SMS group for the expansion and improvement of the product spectrum of the ERW lines installed in Harrow, Canada, and Blytheville, U.S.A. This latest order marks the next step in a successful cooperation between both companies,” it said. 

SSAB to Install New Welded Tube Lines

Fives has won an order for two of its OTO welded tube lines from SSAB Europe, the equipment builder said Tuesday.

In a statement, Fives said the two lines are bound for SSAB’s Hämeenlinna facility in Finland. The lines will be capable of producing tubes in diameters from 16mm to 130mm and in thicknesses . The mill lines will be designed to process high grade yield carbon steel to produce tubes with 8mm maximum thickness for automotive applications.

OTO tube mill lines will be designed and preassembled at Fives’ plant in Boretto, Italy, and delivered to Hämeenlinna’s in 2019-2020.

“Fives’ proposal featured innovative technical solutions and production flexibility to meet highly customized advanced technology equipment requirements, as well as tight scheduling,” the company said. “The scope of supply includes fully automatic entry lines, forming and sizing section with quick change, tools and cut-off units.”

TMK Sells U.S. Branch to Italy’s Tenaris

The largest manufacturer of steel pipes for the oil and gas industry in Russia, TMK,Metal-Expo regular exhibitor, has agreed on selling its U.S. branch IPSCO Tubulars Inc. for $1.2 billion to Italy’s Tenaris, RBC reported citing the companies’ press service.

The sum does not include IPSCO’s funds and the debt, the size of which the parties have not revealed. According to RBC, the deal fits the company’s strategy that indicates monetizing international assets as one of its priorities.

Now, TMK is not planning on selling any other international assets, a company representative told the news outlet. “Over the past 15 years, we have been expanding our manufacturing presence and positioning in the U.S. market. This acquisition would mark a further step in our journey as a domestic producer and supplier of the U.S. oil and gas industry,” said Paolo Rocca, chairman and CEO of Tenaris.

The funds raised from the sale amount to 38% of TMK’s overall debt, says Maxim Khudalov, Director of rating agency ACRA. For finalizing the deal, there is the need to comply with certain preliminary conditions, including receiving any necessary permissions.

Headquartered in Houston, IPSCO owns 11 enterprises in the United States and Canada, including service centers and trading houses. The company accounts for 15% of the U.S. market of seamless oil and gas pipelines and is among three major suppliers.

The Russian company had planned to hold an IPO of its branch in February 2018, but postponed it a week after the U.S. Treasury Department published its “Kremlin report” that blacklisted 210 Russian government officials and businessmen from the Forbes list of billionaires and CEOs of major state corporations, including TMK’s owner Dmitry Pumpyansky.

TMK is not the first Russian metals company that is selling its assets in the United States. Several years ago, Alexei Mordashov’s Severstal sold all of its U.S.-based plants after Russia annexed Crimea and U.S. sanctions were introduced against Moscow.

Outokumpu: stainless steel market still challenging

HELSINKI (AFN) - The Finnish company Outokumpu believes that the stainless steel market will remain challenging in the first quarter due to the large stocks at distributors. That is what the industry colleague of Amsterdam-listed Aperam writes in his figure publication.

Concessions offered to Brussels on Thyssen-Krupp and Tata Steel merge

BRUSSELS (AFN / BLOOMBERG) - ThyssenKrupp and Tata Steel have offered concessions to the European Commission for approval of the intended merger of their European steel activities. A spokesperson for the committee announced this, without mentioning further details about the commitments.

Brussels is currently investigating the matter thoroughly. The Committee fears that the merger will have a negative impact on competition in the steel market, which may result in potentially unwanted price increases. The provisional deadline for the judgment has now been postponed to 5 June. A decision would initially be taken on 13 May.

ThyssenKrupp reported that the commitments cover all concerns of the committee. According to the company, these are "extensive and substantial" concessions to Brussels that are acceptable to the merger partners.

Last year the merger between the European divisions of the German ThyssenKrupp and the Indian Tata Steel was finalized. The new company will be called ThyssenKrupp Tata Steel and will be headquartered in Amsterdam. The former Hoogovens in IJmuiden will become part of the merger company.

 Carbon steel qualities

COMPARAZIONE QUALITA

 

Smartsupp Live Chat

© 2017 austriatubi - P.I. 04878340969

We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies DATA PROTECTION NOTICE